Preventive and corrective maintenance for cyclotrons, synthesis modules, dispensing units, shielded isolators, hot cells and transfer systems, with short downtime.
A production line that stops is a batch that is not delivered. Our engineers work directly on your equipment, worldwide, with interventions planned to keep the machine available and the downtime short.
The know-how comes from years spent inside radiopharmaceutical production, not from a manual.
A cyclotron fault has to be handled both inside and outside the bunker, and every minute spent inside is dose taken by whoever is working there.
Our engineers have more than twenty-five years of experience on most commercial cyclotrons, and the intervention is organized to keep exposure low, for them and for everyone else on site.
An automated synthesis module degrades without warning: the sequence still runs, but yield and purity fall.
We know where each platform tends to give trouble, and preventive maintenance is set up on those points.
The dispensing unit is the last step before the dose reaches the patient, and a fault here stops the line straight away.
Preventive maintenance keeps the dispensed doses consistent and the unit available when production is running.
A shielded isolator that loses containment or pressure cascade takes the whole clean area down with it, and the qualification with it.
We maintain isolators and hot cells used in radiopharmaceutical production, keeping performance and containment within the limits the facility was qualified against.
The transfer line between targets and synthesis cells is a single point of failure: when it stops, no cell receives activity.
We support radioisotope transfer and switching systems, including our own CVRP II, keeping the routing between targets and hot cells available.
See CVRP II →Not every fault requires an engineer on site. Our engineers are available for remote assistance, to support each customer when the need arises and avoid downtime.
Replacement parts for commercial platforms are supplied on request, together with components developed by our own engineering.
See spare parts →Interventions are scheduled on your equipment and your production calendar, so the machine is serviced when it suits you rather than when it fails. Please contact us to set up your service programme.
Tell us your equipment and the issue, and we will come back with availability.